Effect of hardness and composition gradients on Barkhausen emission in case hardened steel

The effect of gradients in hardness, structure and composition in the surface layers on magnetic Barkhausen noise (MBN) was investigated in two widely used low alloy steels. One material was case hardened by induction hardening. The other was case carburised. Similar hardness profiles were produced by the two treatments. It was found that the variation in structure and hardness through the case in the induction-hardened steel had a minor effect on the MBN profile. In contrast, the inhomogeneity in the case-carburised material showed up clearly. This took the form of a broadened or two-peak MBN profile. When the surface layer containing the case was removed by etching, the broadened profile was replaced by a profile with a single peak. It is concluded that the shape and position of the MBN profile is significantly affected when a gradient in microstructure is induced by a gradient in carbon content. On the other hand, a gradient in microstructure induced by heat treatment with a constant carbon level has much less affect on the MBN profile for the induction-hardened steel.     

TDI线扫相机光学通道建模与仿真

卫星相机建模与仿真研究不论在民用还是军事领域都具有重要的理论研究和实际应用价值。根据TDI线扫相机的工作原理建立了一个TDI线扫相机光学通道的数学模型,该模型包括从景物到TDI CCD离散图像的几何投影关系和能量传递关系两部分,对于确定的成像系统,给定景物参数和光学系统参数,就可以确定对应图像传感器上的离散图像。为了验证模型,对一幅卫星图像进行了计算机仿真。建立的模型可以用来研究当成像条件改变时对图像的影响,进一步还可以用来发展虚拟卫星相机系统。     

离心泵快速启动过程外部特性的试验研究

介绍离心泵快速启动试验装置和试验方法,对一台出口直径为80 mm的小型管道离心泵进行试验研究,分别测试了试验泵的稳态性能和各项瞬态性能,比较分析了两者的区别。结果显示,启动过程中,离心泵的扬程紧跟转速到达最大值,转速稳定后的瞬态性能与稳态假设对应,流量和扬程的上升历程与管路阻力特性直接相关,而转速与其基本无关; 在启动初始阶段,无量纲扬程呈现很大值,继而迅速减小到低于稳态假设值,表现出明显的瞬态效应。     

Influence of chemistry and hot rolling conditions on high permeability non-grain oriented silicon steel

This paper discusses the influence of chemical composition on the final electromagnetic properties in higher permeability material. Furthermore, the effect of the hot rolling practice and the end of austenite transformation temperature range on the hot band microstructure is described. The magnetic polarization J₅₀₀₀ better than 1.7 T, using hot rolling conditions 40 mm transfer bar thickness, finish mill entry temperature 1000 °C, and finishing temperature 800–840 °C and after decarburization heat treatment and grain growth treatment, was obtained.     

Dynamic electrochemical impedance spectroscopy measurements of passive layer cracking under static tensile stresses

Electrochemical impedance spectroscopy allows the examination of corrosion susceptibility and resistance for different construction materials, in particular the determination of the properties of their passive films. This technique makes possible the analysis of electrochemical processes in time domain, including rapid phenomena such as changes in the properties of passive films, but it has never been used for passive layer cracking examination. In many cases, fracture of the passive film under tensile stresses leads to stress corrosion cracking. Therefore, investigations of passive layer cracking on austenitic stainless steels under tensile stresses facilitate the understanding of the mechanism of stress corrosion cracking in these common engineering materials. The effect of static tensile stresses on the passive film cracking behaviour of type 304L stainless steel immersed in 0.5 M NaCl solution at room temperature has been investigated. This paper presents the impedance spectra obtained for 304L stainless steel samples at different potential values.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

Die Isolierung radioaktiv markierter nichtmetallischer Einschlüsse aus Hochlegierten Stählen

Zur Isolierung von Einshlüssen aus hochlegierten Stählen werden die Hauptkomponenten Fe, Ni, Cr und weitere Metalle durch mehrstufig ausgeführte Flüssig-Flüssig-Extraktionen mit verschiedenen Extraktionsmitteln abgetrennt. Die im Eindampfrückstand der wäβrigen Phase nach der Extraktion verbleibenden Einschlüsse können für die meisten Radionuklide ohne nennenswerte Selbstabsorption mit einem Groβflächenzählrohr oder anderen geeignetenZählvorrichtungen ausgemessen werden.     

一种新的磁共振图像处理流水线的设计与实现

磁共振图像的重建、后处理及可视化是磁共振成像（MRI）系统的重要组成部分.本文开发了一个新的用于磁共振图像重建、后处理及可视化的开源框架YAP（Yet Another Pipeline），利用此框架可以方便地构建图像处理流水线.与现有的一些其他开源框架相比，本文开发的框架具有如下特点：（1）采用基于接口的设计，可使用基于接口的插件对流水线的功能进行扩展；（2）允许用户使用编写脚本的方式构建图像处理流水线，编辑与修改流水线都很方便；（3）支持带有分支结构的流水线，便于流水线的构建与调试.目前，该框架已经在商用系统中获得了应用.     

XPS study of Cr segregation in a martensitic stainless steel

Cr martensitic steels are promising materials for structural applications in future nuclear fusion reactors. Because the embrittlement after tempering treatments can be a serious problem, the fracture mode of a steel with 10.5 wt% of Cr treated at 700°C for 18 h has been investigated through Charpy tests in the temperature range from −100°C to +150°C. X-ray photoelectron spectroscopy (XPS) analyses carried out on the fracture surfaces evidenced the segregation of Cr in both ductile and brittle (quasicleavage) fields. The unexpected result indicates that Cr segregation weakens the atomic bonds; thus, the fracture path in both the cases corresponds to the zones with higher Cr content.     

基于氦离子化气相色谱法测定微量氧、氮的影响因素

探讨氦离子化气相色谱法测定样品中微量氧、氮含量的影响因素。采用控制变量法,对色谱柱温度、进样流量、进样管道环境及极化电压等因素对微量氧、氮测定结果的影响进行讨论和分析。结果表明,当色谱柱温度为25~45℃时,色谱柱对氧、氮吸附量最小;当进样流量不小于70 mL/min时,微量氧、氮测定结果受外界干扰最小;当极化电压为80~160 V时,氧、氮具有最佳的响应值;初次测定样品中微量氧、氮含量时,需使进样管道表面吸附的氧、氮处于饱和状态,以便获得理想的测定结果。讨论的结果可为氦离子化气相色谱法测定相关样品中微量氧、氮含量时提供技术参考。     

Stability conditions for a pipeline polling scheme in satellite communications

This paper considers the unknown stability conditions of a pipeline polling scheme proposed for satellite communications. This scheme is modelled as a cyclic-service system with limited service and reservation. The walk times and the maximum number of services to be performed during each polling are dependent on the queue lengths of the stations. The main result is the derivation of the necessary and sufficient stability conditions of the system. Our approach is to map the multi-dimensional stability problem into many 1-dimensional stability problems through the concept of the least stable queue. The least stable queue is one that will become unstablefirst when the system load increases in some parameter region. The stability of the least stable queue thus implies stability of the system. The stability region for the whole system is then the union of the queue stability regions of all the least stable queues that are obtained through dominant systems and Loynes' theorem. We also propose a computable sufficient condition that is tighter than the existing result and present some numerical results.